Northwest Fence and Iron is a subsidiary division of Sundance Metal Fabrication, LLC. and manufactures commercial fence products in Austin, TX. For more than fifteen years, NW Iron has designed, fabricated and installed the finest ornamental iron products available on the market. In the manufacturing of the commercial fence for Austin, TX, all of the products are of a fully welded construction and no clips, pins, rivets or wires are used to hold a completed fence together. Once the construction of a commercial fence in Austin, TX is completed, NW Iron ensures that all materials are fully powder-coated to provide a durable and long lasting finish. NW Iron utilizes the Diamond Coat technology to powder coat the commercial fence of Austin, TX Diamond Coat™ is an ultra fine ground polyester powder, which is applied to the galvanized metal used for the manufacturing of a fence for Austin, TX. Sophisticated electronic equipment is heated to a high temperature (400 degrees or more) causing the polyester to melt and form a continuous coat on the metal. Powder-coating does not need a primer coat and the finished product is far more durable than a painted product.

The smooth finish will not scratch or peel under normal conditions and the coat forms a seal around the metal that does not permit corrosives to reach and attack the metal. All of the commercial fence products of Austin, TX are warranted against defects in materials and workmanship for ten years from the original purchase date as shown on the NW Iron receipt. NW Iron offers the commercial fence of Austin, TX as a product that is far above market standard and the installation of a galvanized steel fence will not only be extremely attractive, but will require virtually no maintenance for many years to come. NW Iron's products are normally used in commercial settings and the commercial fence of Austin, TX is manufactured with increased size and thickness for even greater durability. Unlike many competitors in the field, NW Iron manufactures all its own commercial fence, Austin, TX products. The 50,000 square foot production plant located in Texas allows the company to control the quality and gives it the ability to custom fabricate in a short time.

All domestic steel is used in NW Iron's fencing and gate products. NW Iron uses galvanized steel, which provides a product covered in layers of zinc to prevent rust. For the high quality commercial fence of Austin, TX, the galvanized steel is an essential fabrication component. NW Iron's iron products are perfect for security and containment settings and the aluminum fences are ideally used for securing swimming pool areas where corrosive chemicals or high mineral content water comes into contact with the fence on a regular basis. The commercial fence for Austin, TX clients are offered in the standard colors of Black Pearl, Patrician Bronze and Diamond Green. For even greater effect the NW Iron fencing can be mounted on rock and masonry half walls between tall rock pillars.